Remanufactured
Coats 1250-2D
Wheel Balancer
A High Volume Solution
WHAT MAKES US DIFFERENT IS OUR PROCESS
Our Machines Are More Than A Quick Paint Job
True Rebuilds Require The Following:
- Balancer is completely disassembled down to the Frame.
- Frame is stripped, primed and repainted with original factory paint.
- Direct Drive Motor is disassembled and cleaned thoroughly and then repainted and tested.
- Encoder is checked for proper function and replaced with NEW as needed.
- Cooling Fan is cleaned and tested.
- PCB Board is taken off the Control Panel and cleaned and tested with factory diagnostic equipment to meet load ratings.
- Control Panel is cleaned and tested with Factory Diagnostic Equipment specific to this panel.
- Motor Control Boards tested with Diagnostic Equipment.
- Limit Switches are tested and replaced with NEW as needed.
- ALL Plastic Trim – Hood – Tray – Shroud on Motor – Cone Holder – Screen Holder are cleaned and refinished.
- Each Cone Set and Hub Nut that comes with the Balancer is sand blasted clean and checked for defects. Then tested to ensure they fit Balancer Shaft for accurate balancing.
- Each hub is cleaned and relubricated.
- After the Balancer is reassembled it is recalibrated and tested a minimum of 50 times with various size rims and tires to ensure the Motor Mount Piezos are reading true and the overall performance of the Balancer is ready for daily operation.
- All Factory Labels are replaced with Brand NEW Labels
- Complete PDF copies of the Operator and Spare Parts Manuals come with each machine.
- The Balancer is then stretch wrapped and banded to a pallet with steel strapping for safe shipping worldwide.
All Balancers Come With a Parts Warranty:
1 Year On Drive Motor
90 Days On Remaining Major Components
With Full Technical Support
Key Features:
Automatic offset and diameter data entry for both clip and Tape-A-Weight™ increases productivity and provides accuracy for single-spin balances.
Direct Tape-A-Weight™ placement and laser-guided operation eliminates guesswork, resulting in single-spin Tape-A-Weight™ balances.
Easy behind-the-spoke weight placement helps maintain a “clean” look on custom wheels.
1.5 HP Direct Drive motor delivers best-in-class speed, accuracy and longevity.
Click here to learn more about the COATS® Direct Drive system.
Control panel with easy-to-read position indicators and an integrated VFD screen delivers ease of use and promotes proper balancing techniques.
Direct-select any of eight balancing modes, including several alloy options, plus patch balance.
Simultaneous display of static and dynamic data identifies any excess residual static imbalance, and helps technicians eliminate this leading cause of comebacks.
Specifications:
|
Balancing Modes |
8 |
|
Tire Diameter
|
Up to 44"
|
|
Rim Width Rim diameter
|
2" to 20" 8" to 30"
|
|
Max. Tire Wt.
|
160 lbs.
|
|
Shaft Diameter
|
28mm or 40mm
|
|
Shaft Length
|
8-5/8"
|
|
Resolution: Oz.
|
0.01
|
|
Resolution: Degrees
|
1.4
|
|
Accuracy: Oz.
|
0.1
|
|
Power Requirement
|
220v AC, 1P, 60Hz
220v AC, 3P, 60Hz
|
|
Accessory Storage
|
Optional Peg Kit (8111480)
|
|
Footprint
|
57"W x 50"D
|
|
Shipping Weight
|
625 lbs.
|
BUY NOW - $2799.00
Remanufacturing Service Available
for your Coats®, Corghi®, or John Bean® Tire Equipment
(Please visit our store for more information)
Trade in your tire equipment for one of our completely rebuilt units...
We also purchase used tire equipment
We are the largest tire equipment rebuilder in the US
email or call for more detailed information
CALL FOR DISCOUNTS ON PURCHASES OF MULTIPLE MACHINES
$299.00 SHIPPING
Shipping Cost for this item is to most locations in the US and Canada
Certain remote locations may require additional cost
Shipping costs includes delivery of your order to a business address with a dock or other way to load or unload truck
Liftgate, Residential, and Limited Access Delivery require additional costs if needed for shipment.
ALL MAJOR CREDIT OR DEBIT CARDS ACCEPTED
CALL FOR PROCESSING
eMail with any questions you may have or
CALL (937) - 379 - 0200
8 am - 4:30 pm Eastern Time Monday - Friday
Please visit our store for more tire maintenance equipment
IES sells Quality remanufactured products
The contents of this EBAY listing refers to remanufactured products and/or equipment.
IES takes pride in the extensive rebuilding efforts its trained technicians provide for every piece of equipment sold.
Each product listing details the remanufacturing process IES uses for each product it sells.
The products sold on EBAY have not been endorsed by or approved by the original manufacturer and the products do not fall under the original manufacturer's warranty.
Where indicated, IES provides buyer protection for a parts warranty and full technical support.
COATS®, ROBO-ARM®, RIM CLAMP®, GRIP-MAX®, and other trademarks are registered trademarks owned by Hennessy Industries, Inc.
Please contact us direct at 937-379-0200 if you have additional questions.
