COATS 70X-AH-2 Tire Changer remanufactured with warranty






Built to Make Changing Low Profiles, Run flats, and other Tough Tires Fast and Easy



All Machines Come With 1 Year Parts Warranty


 With Full Technical Support


What Makes Us Different Is Our Process


Our Machines Are More Than A Quick Paint Job


True Rebuilds Require The Following



  • Completely remanufactured by our qualified trained technicians.
  • Each machine is completely disassembled down to the frame.
  • Each Frame is stripped, primed and refinished with industrial grade primer and enamel.
  • Swing Arm to Column Bushings are replaced.
  • Robo Arm® Assembly Completely Rebuilt with NEW Seals - Actuator Valve - Hard Lines - Gauge Assembly.
  •  Transmission Disassembled
  • All components cleaned - NEW Seals - O rings - Bearings are replaced.
  • Gears are checked and replaced as needed to meet original factory specs.
  •  Transmission case refilled with NEW oil and checked for proper operation.
  •  All EH and EF Models come with NEW Turntable Drive Motor - Wiring Harness - Forward Reverse Switch.
  • All Air Motors are disassembled - Cleaned - NEW Vanes - Bearings - Seals replaced and refinished.
  • One-way Flow Valves Reassembled - Torque and PSI settings tested to original factory specs.
  • 4-way Valves replaced with NEW to provide function of the Table Rotation - Bead Breaker System - Table Clamp Movement.
  • Table disassembled - all moving parts readjusted and lubricated. We reset Carriers and Jaws.
  • Table - Bead Breaker - B/L Cylinder are cleaned and refinished. Plungers and Seals replaced.
  • Replace Cylinder Sleeve as needed. We reassemble and test to factory PSI settings.
  • Replaced with all NEW Hoses - Hard Lines – Bolts -  Bead Breaker Button - Actuator Valve - Machine Oil - Regulator - Tire Inflator Whip Hose - Bottle and Brush.
  • Gripmax Table clamps are to Factory Specs.
  • NEW Removable plastic covers for protecting Rims on each clamp.
  • Gauges tested and replaced with new as needed.
  • Pressure Limiter Assembly disassembled and all O Rings and Diaphragms Replaced.
  • Pedal Assembly disassembled, cleaned, checked for wear, adjusted and refinished.
  • After the Tire Changer has been reassembled it is tested thoroughly by changing tires multiple times to ensure proper functioning.
  • Complete PDF copies of the Operator and Spare Parts manuals come with each machine
  • The machine is then stretch wrapped and banded to a pallet with steel strapping for safe shipping worldwide.
  • All Machines Come with a 1 Year Parts Warranty with full Technical Support.



Rim Diameter 6" - 22" External; 8" - 24" Internal

13-28" External (with optional extender clamps - available for additional cost)
Rim Width 14" Maximum
Tire Diameter 50" Maximum
Drive System Air 
Air Source (Air) 150 to 175 PSI, 5 HP compressor, 14 to 15 SCFM @ 150 PSI
Storage 70X: On Chassis
Bead Loosening 70X: Handle Actuated
Chassis Footprint 49"W x 48"D x 76"H
Shipping Weight 700 lbs.




Industrial Engineered Solutions





-- 299.00 SHIPPING --

Rebuild Service Available

for your Coats®, Corghi®, or John Bean® Tire Equipment
(see Rebuild Services section of website)

Trade in your tire equipment for one of our completely rebuilt units...
We also purchase used tire equipment

We are the largest tire equipment rebuilder in the US

Shipping Cost
for this item is to most locations in the US and Canada

Certain remote locations may require additional cost



Shipping costs includes delivery of your order to a business address 
with a dock or other way to load or unload truck 

Liftgate, Residential, and Limited Access Delivery require additional costs if needed for shipment.


Please call us direct at 937-379-0200 with any questions 
8 am - 4:30 pm Eastern Time  Monday - Friday

Yes we ship International

Additional shipping cost applies - Call for Quote


Please visit our store for more tire maintenance equipment



Seller reserves the right to withdraw item from auction at anytime due to prior sale.

IES sells Quality remanufactured products

· The contents of this Ebay Store listing refers to remanufactured products and/or equipment.
· IES takes pride in the extensive rebuilding efforts its trained technicians provide for every
piece of equipment sold.
· Each product listing details the remanufacturing process IES uses for each product it
· The products sold on our Ebay Store have not been endorsed by or approved by the original
manufacturer and the products do not fall under the original manufacturer's warranty.
· Where indicated, IES provides buyer protection for a parts warranty and full technical


COATS®, ROBO-ARM®, RIM CLAMP®, GRIP-MAX®, and other trademarks are registered trademarks owned by Hennessy Industries, Inc