Coats 950 Tire Balancer Remanufactured with Warranty




Coats® 950 /1000
Wheel Balancer
A High Volume Solution

The Model 950 / 1000 wheel balancer is recognized as the workhorse of the wheel service industry.
What Makes Us Different Is Our Process
Our Machines Are More Than A Quick Paint Job
True Rebuilds Require The Following


  • Balancer is completely disassembled down to the Frame.
  • Frame is stripped, primed and repainted with original factory paint.
  • Direct Drive Motor is load tested - bearings checked and cleaned thoroughly.
  • Encoder is cleaned and checked for proper function and replaced with NEW one if needed.
  • Cooling Fan is cleaned and tested.
  • PCB Board is taken off the Control Panel and cleaned and tested with factory diagnostic equipment to meet load ratings, and replaced as needed with NEW.
  • Control Panel is cleaned and tested with Factory Diagnostic Equipment specific to this panel, and replaced as needed with NEW.
  • Motor Control Boards tested with Diagnostic Equipment, and replaced as needed with NEW.
  • Limit Switches are tested and replaced with NEW ones if needed.
  • ALL Plastic Trim – Hood – Tray – Shroud on Motor – Cone Holder – Screen Holder are cleaned and refinished.
  • Each Cone Set and Hub Nut that comes with the Balancer is sand blasted clean and checked for defects. Then tested to ensure they fit Balancer Shaft for accurate balancing.
  • Each hub nut shaft is cleaned and relubricated.
  • After the Balancer is reassembled it is recalibrated and tested a minimum of 50 times with various size rims and tires to ensure the Motor Mount Piezos are reading true and the overall performance of the Balancer is ready for service.
  • Complete PDF copies of the Operator and Spare Parts Manuals come with each machine.
  • The Balancer is then stretch wrapped and banded to a pallet with steel strapping for safe shipping worldwide.







Balancers come with the following parts warranty:
1 Year On Drive Motor and 90 Days On Remaining Major Components
With Full Technical Support



Key Features:


  • 1 1/2 horsepower direct-drive motor and 16-bit microprocessor provide super-fast five second cycle times.
  • Eight separate balancing modes (static and dynamic modes, RV and four different alloy modes, plus match mount).
  • Convenient keypad entry.
  • Keyboard activated "hood start" saves time.
  • Ounce/gram conversion and a roundoff feature eliminates complicated calculations.
  • 25-pocket weight tray provides abundant storage.
  • Self calibration.



Balancing Modes 5
Tire Diameter Up to 40"
Rim Width 2" to 19.9"
Max. Tire Wt. 150 lbs.
Shaft Diameter 1-1/8" or 40mm
Shaft Length 6-5/8"
Resolution: Oz. 0.01
Resolution: Degrees 1.4
Accuracy: Oz. 0.01
Power Requirement 220v AC, 1-3 Phase
Footprint 57"W x 50"D
Shipping Weight 586 lbs.



BUY NOW - ONLY $2299.00

Rebuild Service Available

for your Coats®, Corghi®, or John Bean® Tire Equipment
(see Rebuild Services section of website)

Trade in your tire equipment for one of our completely rebuilt units...
We also purchase used tire equipment
 We are the largest tire equipment rebuilder in the US

  email or call for more detailed information


Shipping Cost for this item is to most locations in the US and Canada


Certain remote locations may require additional cost
Shipping costs includes delivery of your order to a business address
 with a dock or other way to load or unload truck  
Liftgate, Residential, and Limited Access Delivery require additional costs if needed for shipment




email with any questions you may have or
 CALL (937) - 379 - 0200
8 am - 4:30 pm Eastern Time Monday - Friday

Yes we ship International Additional shipping cost applies - Call for Quote





IES sells Quality remanufactured products







  • The contents of this Website listing refers to remanufactured products and/or equipment.
  • IES takes pride in the extensive rebuilding efforts its trained technicians provide for every piece of equipment sold.
  • Each product listing details the remanufacturing process IES uses for each product it sells.
  • The products sold on our website have not been endorsed by or approved by the original manufacturer and the products do not fall under the original manufacturer's warranty.
  • Where indicated, IES provides buyer protection for a parts warranty and full technical support. 

















COATS®, ROBO-ARM®, RIM CLAMP®, GRIP-MAX®, and other trademarks are registered trademarks owned by Hennessy Industries, Inc.
Please contact us direct at  937-379-0200  if you have additional questions.