Remanufactured
HARBIL 5G
Paint Shaker
and
-- COMPLETELY REMANUFACTURED --
-- $299.00 SHIPPING --
Harbil 5G
What Makes Us Different Is Our Process
Our Machines Are More Than A Quick Paint Job
True Rebuilds Require The Following
Shaker is completely dismantled down to the frame.
All parts are cleaned of paint splatter and buildup.
Everything is repainted with original factory paint.
Reassembled starting with the outer and inner frame.
NEW Flange Bearings installed.
NEW Shock Springs – Strut and Pilot Pins replaced as needed.
Crank Assembly and Pillar Block Bearings checked and replaced as needed to meet factory specifications.
Crank Main Drive Motor Amp Load tested and Bearings checked.
Platen Lead Screws checked and lubricated.
Swivel Rods checked and replaced as needed.
Dc Motor and Gear Box checked and voltage draw tested.
NEW wiring to Dc Motor and Main Crank Motor.
Switches and Buttons tested and replaced with NEW as needed.
Pc Panel Control Board tested to factory specifications and replaced as needed.
NEW Clear Plexiglas Door installed.
NEW labels installed.
NEW Leveling Feet installed
Shaker is tested using 5 and 1 gallon containers for at least 25 cycle
Shaker is banded to a pallet and shrink wrapped for safe shipping worldwide.
All of our remanufactured
Harbil® 5G Paint shakers include a
90 day parts warranty on all electrical parts
6 month on all mechanical parts with full technical support by telephone
Key features of the 5G HD:
Heavy-duty crankshaft and shake frame to reduce downtime and boost reliability
Minimal-vibration patented design for quiet and safe operations
Outside operating switches with emergency stop button to enhance safety
Reversible door that can be opened from either side
Flexible clamping space to handle a wide range of product heights
NEW REPLACEMENT COST - $5600.00 + SHIPPING
Remanufactured
Red Devil 1025
One Gallon Gyroscopic Mixer
The 1025 one gallon gyro mixer continues to add to the long line of product innovation from Red Devil Equipment.
The gyroscopic mixing action of the 1025 ensures a thorough mix for a wide range of materials. In addition, the 1025 accepts any one gallon shaped container with out an adapter or special loading requirements.
An advanced Direct-Drive™ gear system with a 2:1 mixing ratio, and one step clamping system allow for quick and smooth operation for all your mixing needs.
The 1025 is very easy to use and is extremely quiet, making it an ideal product for many environments.
Mixes gallons and containers ranging from 7 to 8¼ inches in height and a maximum diameter of 8½ inches.
Adapter sold separably for mixing quarts and containers ranging from 4¾ to 6¼ inches in height and a maximum diameter of 5¾ inches for the bottom plate and a maximum of 8½ inches in diameter for the top plate
One-step clamping system allows for quick and easy loading and unloading
25 lb. standard load capacity
DIRECT DRIVE GEAR SYSTEM
-- COMPLETELY REMANUFACTURED --
What Makes Us Different Is Our Process
Our Machines Are More Than A Quick Paint Job
True Rebuilds Require The Following
· Mixer is completely dismantled down to the frame.
· All parts are cleaned of paint splatter and buildup.
· Everything is repainted with original factory paint.
· Reassembled starting with the outer and inner frame.
· NEW Drive Bearings installed.
· Crank Assembly and Gear Drive Assembly checked and replaced as needed to meet factory specifications.
· Crank Main Drive Motor Amp Load tested and Bearings checked.
· Platen Lead Screw checked and lubricated.
· Gear Box checked and serviced.
· NEW wiring to Main Crank Motor.
· Switches and Buttons tested and replaced with NEW as needed.
· Pc Panel Control Board tested to factory specifications and replaced as needed.
· NEW Timer, timer wiring and circuits installed as needed.
· NEW factory labels installed.
· NEW Leveling Feet installed.
· Mixer is tested using 1 gallon containers for a minimum of at least 25 cycles.
· Mixer is banded to a pallet and shrink wrapped for safe shipping worldwide.
All of our remanufactured Red Devil 1025 Gyro Mixers come with a
6 Month parts warranty on all mechanical components,
90 Day parts warranty on all electrical components,
with full technical support by telephone
Remanufacturing Service Available
(see Rebuild Services section of our store)
Trade in your paint equipment for one of our completely remanufactured units...
We also purchase used paint equipment
We are the largest paint equipment remanufacturer in the US
-- $299.00 SHIPPING --
To Most Business Locations In The Lower 48 States.
There may be additional Charges To Certain Locations.
If Liftgate, Residential, or Limited Access Delivery is required, Please Contact Seller For Cost.
ALL MAJOR CREDIT OR DEBIT CARDS ACCEPTED
Yes we ship International All Countries
Additional shipping cost applies - Call for Quote
Please visit our store for more paint equipment
Seller reserves the right to withdraw item from auction at anytime due to prior sale.
IES sells Quality remanufactured products
- The contents of this EBAY listing refers to remanufactured products and/or equipment.
- IES takes pride in the extensive rebuilding efforts its trained technicians provide for every piece of equipment sold.
- Each product listing details the remanufacturing process IES uses for each product it sells.
- The products sold on EBAY have not been endorsed by or approved by the original manufacturer and the products do not fall under the original manufacturer's warranty.
- Where indicated, IES provides buyer protection for a parts warranty and full technical support.
Fluid Management®, and other trademarks are registered trademarks owned by Fluid Management Inc.
