Product Description

Remanufactured
COATS® 70X-AH-1

TIRE CHANGER

and

Remanufactured

COATS 950

TIRE BALANCER

 

 

Remanufactured
COATS® 70X-AH-1

TIRE CHANGER

 

 

Built to Make Changing Low Profiles, Run flats, and other Tough Tires Fast and Easy

 

 

This machine is a complete tear down to the frame.

Frame is refinished with new industrial grade paint and labels.

Every component is completely taken apart and rebuilt with new internal parts.

Most important of all, we back up our machines 100 percent with a 1 year parts warranty with full technical support

and we have the customers to prove it.

We have been in business 25 years and 24 years on Ebay with a 100 percent positive feedback rating.

 

There are plenty of copycats in this industry, but there is only ONE

 

What Makes Us Different Is Our Process

Our Machines Are More Than A Quick Paint Job

True Rebuilds Require The Following

• Completely remanufactured by our qualified trained technicians.Each machine is completely disassembled down to the frame
• Each Frame is stripped, primed and refinished with industrial grade primer and enamel.
• Swing Arm to Column Bushings are replaced.
• Robo Arm® Assembly Completely Rebuilt with NEW Seals – Actuator Valve – Hard Lines – Gauge Assembly.
•  Transmission Disassembled
• All components cleaned – NEW Seals – O rings – Bearings are replaced.
• Gears are checked and replaced as needed to meet original factory specs.
•  Transmission case refilled with NEW oil and checked for proper operation.
•  All EH and EF Models come with NEW Turntable Drive Motor – Wiring Harness – Forward Reverse Switch.
• All Air Motors are disassembled – Cleaned – NEW Vanes – Bearings – Seals replaced and refinished.
• One-way Flow Valves Reassembled – Torque and PSI settings tested to original factory specs.
• 4-way Valves replaced with NEW to provide function of the Table Rotation – Bead Breaker System – Table Clamp Movement.
• Table disassembled – all moving parts readjusted and lubricated. We reset Carriers and Jaws.
• Table – Bead Breaker – B/L Cylinder are cleaned and refinished. Plungers and Seals replaced.
• Replace Cylinder Sleeve as needed. We reassemble and test to factory PSI settings.
• Replaced with all NEW Hoses – Hard Lines ? Bolts –  Bead Breaker Button – Actuator Valve – Machine Oil – Regulator – Tire Inflator Whip Hose – Bottle and Brush.
• Table clamps are to Factory Specs.
• NEW Removable plastic covers for protecting Rims on each clamp.
• Gauges tested and replaced with new as needed.
• Pressure Limiter Assembly disassembled and all O Rings and Diaphragms Replaced.
• Pedal Assembly disassembled, cleaned, checked for wear, adjusted and refinished.
• After the Tire Changer has been reassembled it is tested thoroughly by changing tires multiple times to ensure proper functioning.
• Complete PDF copies of the Operator and Spare Parts manuals come with each machine
• The machine is then stretch wrapped and banded to a pallet with steel strapping for safe shipping worldwide.
• All Machines Come with a 1 Year Parts Warranty with full Technical Support.

Specifications:

Rim Diameter	6″ – 22″ External; 8″ – 24″ Internal 13-28″ External (with optional extender clamps – available for additional cost)
Rim Width	14″ Maximum
Tire Diameter	50″ Maximum
Drive System	Air
Air Source (Air)	150 to 175 PSI, 5 HP compressor, 14 to 15 SCFM @ 150 PSI
Storage	70X: On Chassis
Bead Loosening	70X: Handle Actuated
Chassis Footprint	49″W x 48″D x 76″H
Shipping Weight	700 lbs.

 

REMANUFACTURED BY

Industrial Engineered Solutions

 

Remanufactured
Coats® 950
Wheel Balancer

 

What Makes Us Different Is Our Process

Our Machines Are More Than A Quick Paint Job

True Rebuilds Require The Following

 Balancer is completely disassembled down to the Frame.

• Frame is stripped, primed and repainted with original factory paint.
• Direct Drive Motor is disassembled and cleaned thoroughly and then repainted and tested.
• Encoder is checked for proper function and replaced with NEWones if needed.
• Cooling Fan is cleaned and tested.
• PCB Board is taken off the Control Panel and cleaned and tested with factory diagnostic equipment to meet load ratings.
• Control Panel is cleaned and tested with Factory Diagnostic Equipment specific to this panel.
• Motor Control Boards tested with Diagnostic Equipment.
• Limit Switches are tested and replaced with NEWones if needed.
• ALL  Plastic Trim ? Hood ? Tray ? Shroud on Motor ? Cone Holder ? Screen Holder are cleaned and refinished.
• Each Cone Set and Hub Nut that comes with the Balancer is sand blasted clean and checked for defects. Then tested to ensure they fit Balancer Shaft for accurate balancing.
• Each hub is cleaned and relubricated.
• After the Balancer is reassembled it is recalibrated and tested a minimum of 50 times with various size rims and tires to ensure the Motor Mount Piezos are reading true and  the overall performance of the Balancer is ready for service.
• Complete PDF copies of the Operator and Spare Parts Manuals come with each machine.
• The Balancer is then stretch wrapped and banded to a pallet with steel strapping for safe shipping worldwide.

 

 

All 950 Balancers Come With Parts Warranty

1 Year On Drive Motor and 90 Days On Remaining Major Components

With Full Technical Support

Key Features:

• 1 1/2 horsepower direct-drive motor and 16-bit microprocessor provide super-fast five second cycle times.
• Eight separate balancing modes (static and dynamic modes, RV and four different alloy modes, plus match mount).
• Convenient keypad entry.
• Keyboard activated “hood start” saves time.
• Ounce/gram conversion and a roundoff feature eliminates complicated calculations.
• 25-pocket weight tray provides abundant storage.
• Self calibration.

Specifications:

Balancing Modes	5
Tire Diameter	Up to 40″
Rim Width	2″ to 19.9″
Max. Tire Wt.	150 lbs.
Shaft Diameter	1-1/8″ or 40mm
Shaft Length	6-5/8″
Resolution: Oz.	0.01
Resolution: Degrees	1.4
Accuracy: Oz.	0.01
Power Requirement	220v AC, 1-3 Phase
Footprint	57″W x 50″D
Shipping Weight	586 lbs.

 

BUY NOW:
$7298.00

Rebuild Service Available
for your Coats® Tire Equipment
(see Rebuild Services section of website)
Trade in your tire equipment for one of our completely rebuilt units…
We also purchase used tire equipment
We are the largest tire equipment rebuilder in the US

 

— $399.00 SHIPPING —

Shipping Cost for this item is to most locations in the US and Canada

Certain remote locations may require additional cost

Shipping costs includes delivery of your order to a business address

with a dock or other way to load or unload truck

Liftgate, Residential, and Limited Access Delivery require additional costs if needed for shipment.

ALL MAJOR CREDIT OR DEBIT CARDS ACCEPTED

 

Please call 937-379-0200 with any questions you may have
8 am – 4:30 pm Eastern Time Monday – Friday

 

Yes we ship International
Additional shipping cost applies – Call for Quote

 

IES sells Quality remanufactured products

• The contents of this Ebay Store listing refers to remanufactured products and/or equipment.
• IES takes pride in the extensive rebuilding efforts its trained technicians provide for every piece of equipment sold.
• Each product listing details the remanufacturing process IES uses for each product it sells.
• The products sold on our Ebay Store have not been endorsed by or approved by the original manufacturer and the products do not fall under the original manufacturer’s warranty.
• Where indicated, IES provides buyer protection for a parts warranty and full technical support.

COATS®, ROBO-ARM®, RIM CLAMP®, GRIP-MAX®, and other trademarks are registered trademarks owned by Hennessy Industries, Inc